Dayton Audio 200w Bass Shaker Bridgeable Amplifier

Dayton Audio bridgeable powers stereo 110Wrms (2 Ohm) or bridgeable 200Wrms (4 Ohm) amplifier is a perfect solution for bass shaker or subwoofer installs. Built-in low pass filter is adjustable. Includes a convenient wired remote volume control.

Dayton Audio high power low-pass amplifier is designed to power Dayton’s range of tactile transducers and works equally as well as a dedicated subwoofer speaker amplifier. The frequency (20-200Hz) and balance knobs let you dial in the desired crossover point and output. Convenient wired remote volume & power control. Rated at 110Wrms per channel 2 ohm stable. In bridged mono mode, both amplifier channels are combined for high-power 230Wrms mono. Manual and automatic on/off modes allow easy integration into automated systems and saves power when not in use. 5V USB power output is designed for use with the Dayton Audio Wave-Link wireless system (sold separately, see WLS). Gold plated 4mm or bare wire speaker binding terminals. Compact 60x240x210mm. Includes brackets for vertical or horizontal mounting.

Product Highlights

• Powerful 200 watt amplifier optimised for bass shaker installations
• Robust 2 ohm minimum impedance provides maximum output to bass shakers
• RCA line in and out for daisy chaining multiple units
• Adjustable 50-200 Hz low pass crossover for seamless audio integration
• Built-in USB port for powering 5V devices or for use with the wireless Dayton Audio Wave-Link receiver (Optional, see WLS)
• Included wired remote provides a convenient location for the volume control
• Compact 64x24x22mm. Includes brackets for custom mounting solutions

Output power: 110 watts RMS per channel @ 2 ohms, 230 watts RMS @ 4 ohms ( minimum impedance) bridged mono Input sensitivity: 170 mV Frequency Response: 5-200 Hz +/- 3 dB Variable low pass: 50-200 Hz Total harmonic distortion: 1% ( stereo ), 0.05%(mono) Signal to noise ratio: 91 dB @ 100 Hz A-weight Power requirements: 110-240 VAC Max power consumption: 313W Stand-by power rating: 0.5W Auto turn-on sensitivity: 10 mV Dimensions: 64x241x216mm

Model Number	BSA-200
Brand	Dayton Audio
Description	200W Bass Shaker Bridgeable Stereo Amplifier with Remote
Unit of Measure	Each
UPC	848791005497
Warranty – Parts]	5 Years
Product Shipping Weight (lbs.)	4.85
Product Height	2.5″
Product Width	9.5″
Product Length	—
Product Depth	8.5″
Amplifier Type	Power Amplifiers
Power Output	110 watts RMS per channel @ 2 ohms 230 watts RMS @ 4 ohms (minimum impedance) bridged mono
Output Channels	2
Output Connectors	5-Way Binding Posts x 2, RCA L/R x 1, USB (for 5V power only)
Output Types	Speaker Outputs, USB Outputs (power only), Line Output
Inputs	1
Input Connectors	RCA L/R x 1
Input Impedance	—
Signal-to-Noise Ratio	91 dB @ 100 Hz A-weight
THD @ Rated Power	(stereo): 1%, (mono): 0.05%
Parametric EQ	—
Phase Adjustment	—
Low-pass Crossover	50-200 Hz
Low Pass Adjustment	—
Dynamic Range	—
Frequency Response	5-200 Hz +/- 3 dB
Efficiency	—
Gain	—
Bass Boost	—
Voltage Requirement	110-240 VAC
Auto-on Sensitivity	10 mV
Stand-by Power Rating	0.5W
Special Features	Wired remote

12 Months Manufacturer Warranty against defects as described in a document inside the product’s packaging or manufacturer website.

Shipping by default is an Australia Post parcel.

If you desire a different form of shipping please contact us in the assistance tab, or contact us after your order, and we can organise a courier of your choice, or for some products pickup from the Stuff 2 Buy office in Forestdale 4118.

If you require further assistance in regards to this product, or product choice; Just fill in the contact form and someone will be in touch to help you